Canon LASER CLASS 730i Service Manual page 30

LASER CLASS 730i/720i/710 Chapter 1: General Description
1
Printer Operation Panel
See page 1-24.
2
Counter Check
Press to check the counter information.
3
Direct TX
Sets the machine to the Direct Sending mode so
you can send a document ahead of other
documents stored in memory Direct Sending.
scans a document, and sends it immediately
without storing the document in memory.
4
Fax / I-Fax
Press to switch between Line 1 and 2 when the
optional Dual-Line Kit III is installed.
5
Cursor
Moves the cursor to the left or right during data
registration.
Search Keys
Enables you to scroll through the display so you
can see other options and selections in the
menus during data registration.
Also press to search through the registered fax
numbers during directory dialing.
Set
6
Selects a menu item during data registration.
7
One-Touch Speed Dilaling Keys
Dials numbers registered under one-touch speed
dialing keys.
8 One-Touch Speed Dialing Panels
The first panel displays keys 1-24. Open the first
panel to access keys 25-48. Open the second
panel to access keys 49-72. Open the third panel
to access the registration Keys.
9 Energy Saver
Switches the machine in/out of the Energy Saver
mode.
10 Copy
Enables the machine to act as a copier, so you
can copy a document.
Keys
Figure 1-7 Operation Panel (2)
1-20
11 Speaker Volume Switch
Adjusts the speaker's volume.
12
Clear
Clears an entire entry during information
registration.
Stop
13
Cancels sending, receiving, data registration, and
other operations, and returns the machine to the
Standby mode.
14
Start
Enables you to start sending, receiving, scanning,
and copying documents.
15
Error Lamp
A light that blinks red when a paper jam occurs or
the machine has run out of paper or toner. The
error is described by a message that appears on
the LCD display.
In Use/Memory Lamp
16
A light that blinks green when the machine is
transmitting or receiving documents, or maintains
a steady green when there are documents stored
in memory.
17
Numeric Keypad
Use the keys on the numeric keypad to enter
telephone numbers when dialing. These keys are
also used to enter text, numbers, and symbols
when registering names and numbers.
18 Hook
Enables you to dial, even when the handset is still
on the handset rest.
19 Coded Dial
Press [Coded Dial], followed by a three-digit code
to dial the telephone number registered for coded
speed dialing.
20
Redial/Pause
Redials the previous number dialed manually with
the keys on the numeric keypad. Enters pauses
between digits or after the entire telephone
number when dialing or registering facsimile
numbers.
21 Directory
Enables you to search for fax/telephone numbers
by the name under which they are registered for
speed dialing, and then use the number for
dialing.
manuals4you.com manuals4you.com