Canon LASER CLASS 730i Service Manual page 35

LASER CLASS 730i/720i/710 Chapter 1: General Description
4
Menu
When the printer is offline, press [Menu] to scroll
through the menu names. To scroll through the
menu names in reverse order, hold [Shift] while
pressing [Menu].
5 Item
When a menu name is displayed, press [Item] to
scroll through the items in that menu. To scroll
through the items in reverse order, hold [Shift]
while pressing [Item].
Depending on what options are installed, some
items may not appear.
Value
6
When an item from a menu is displayed, press
[Value] to scroll through the item's values. Hold
[Shift] while pressing [Value] to scroll through the
values in reverse order.
Some items have a large range of values. For
example, if you select <COPIES> as an item, you
can set a value from 1 to 999. To quickly scroll
through and select a value, hold down [Value].
7
Enter/Cancel
Saves a value you selected for an item in the
menu. An asterisk (*) indicates the current default
setting.
To Cancel
Hold [Shift] while pressing [Enter/Cancel] to
cancel the current operation.
If a cancel operation is performed while the
printer is receiving data, this causes the input
data to be flushed from the printer's memory. The
message <READY/FLUSHING...> appears on
the display while the data is being flushed.
<READY> appears after the data has been
flushed from the memory.
To cancel a print job, press [Go] to take the printer
offline, then hold [Shift] while pressing
[Enter/Cancel].
Figure 1-12 Operation Panel (7)
8
LCD Display
Displays messages and prompts during
operation. It also displays selections, text,
numbers, and names when registering
information.
Shift
9
Hold [Shift] to scroll through menus, items, and
values in reverse order.
Go
10
Takes the printer offline, and brings it back online.
When the On Line indicator is on, the printer is
ready to receive data and print. When the On
Line indicator is off, the printer is offline, and you
can use the other keys on the printer operation
panel to view and change settings.
Press [Go] to resume a printing operation and
display a message. For most situations, after you
press [Go], the message clears and printing
resumes.
To perform a form feed and print any data
remaining in the printer's memory, press [Go]
twice.
11 PRT.Message
Press [PRT.Message] to switch the machine to
the Printer mode.
1-25