Table of Contents
Advertisement
sPEcIfIcATIoNs
Generation ...................................................................................................... 2nd, 2nd+
Magnification................................................................................................... 2X (4X optional)
Objective:
Focal lenght................................................................................................... 50 mm
F Number................................................................................................... 1.2
Focus................................................................................................... Fixed
FOV ................................................................................................................. 20 deg.
Reticle ............................................................................................................. Red On Green
Windage & elevation adjustments ................................................................. 1/2MOA
IR illuminator ................................................................................................... Super 450mw
Battery life....................................................................................................... 30-50 hours
Dimensions ........................................................................................ 250 x 95 x 85mm/10" x 3.6" x 3.2"
Weight ............................................................................................................ 0.9kg/2 Lbs
Diopter adjustment ........................................................................................ +/ -5
Operating temperature ........................................................................................ -40°C to +40°C
PREPARATIoN foR oPERATIoN
Before getting started make sure to follow these
steps:
• Install the battery into its housing with the polarity
order shown on the main body of the unit.
• Switch on the scope with the protective lens cover
still attached to the lens.
• Make sure that the green luminance of the light
intensifier tube is present.
• Observe the scene, and adjust the diopter and/or
lens for optimal image clarity.
• You may now enter a dark environment or simply
shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
• Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the scope to
see in total darkness with the aid of the IR illuminator.
oPERATINg
mouNTINg
1. Slightly loosen the fixing screws on the 7/8" weaver mount built into the scope.
2. Place the scope on the weaver rail of the fire arm.
3. Tighten the fixing screws.
NOTE: Fixing screws may need to be tightened after continuous shooting.
mouNTINg sysTEm
The ATN Night Vision Riflescopes Mounting System allows to change the position of the rif-
lescope flexibly on the weapon in relation to a shooter in combination with the fixed positions
already available on the weaver rail. For this purpose in the base of the mounting bracket there
is a rail with a fixing projection. There are two grooves in the mounting bracket for mounting
this rail. Besides it is possible to change the position of the riflescope additionally by 1/3 of
inch. For doing this one needs to about-face the rail.
Battery
installation
2
Advertisement
Table of Contents
