APPLICATION The Aries 258 night vision weapon scope is a complex computerized system for the observa- tion of objects at low light levels (less than 1.0 lux. ) Containing an on board computer, these scopes are some of the most advanced night vision weapon scopes in the world The Aries 258 consists of the objective lens assembly, ocular lens assembly and the body.
INFRA-RED ILLUMINATION By pressing the “SL” button a third time you will then see a Infra-red illuminator red diode “I” light up. The red diode represents the 100M infra-red illuminator’s brightness adjustment mode. Adjust- ments should be easily seen if you look through the Aries 258 while you work the “+”...
other situations with strong lighting may result in a temporary decrease of the proximity sensor’s performance. LOW BATTERY INDICATOR A Low battery indicator is another feature that is programmed into your “Smart” scope. If the bat- teries start losing voltage. Led “B“ will start to pulse.
MOUNTING THE ARIES 258 1. Slightly loosen horizontal and vertical fixator screws on the dove tail clamps, allowing the clamps to slide on the rail. 2. Place the scope on dovetail mount, making certain that the mount aligns with the receptor attachment screw groove.
Page 7
Mk-258 in order to get the sharpest image possible. • We suggest that you find an open space to work in. Focus the Aries Mk-258 so that the scene is at its sharpest. For the best results you should disable the auto focus (if any) on either the 35mm camera or the video camera and manually focus the 35-mm camera or the video camera.
PREPARATION FOR OPERATION Before getting started make sure to follow these steps: • Take the scope out of the case. • Install the batteries into its housing with the polarity order shown on the main body of the unit. • Switch on the Aries scope with the master power switch, make sure the protective lens cover is still attached to the tens.
WARNINGS AND CAUTIONS • Always remember to turn off the Aries 258 when it is not in use. If you do not plan on using your aries scope for a period of more than 10 days, you should remove the batteries. •...
ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...