Table of Contents
Advertisement
B. OPERATION PANEL
Figure 8
Press the top right button [ ] ⑯ to turn the transceiver power ON and OFF.
Rotate the [BAND SEL] ⑫ to adjust the speaker volume. Press the left [BAND SEL] to select
the A band. Press the right [BAND SEL] to select the B band.
Press [BAND SEL] (1s) to toggle between single and dual-band mode.
Rotate the [SQL] control ring ⑬ to adjust the squelch level. Clockwise tightens the squelch and
counterclockwise opens the squelch.
Press [CALL] ① to select the Call channel.
Press [VFO] ② to enter VFO mode, then rotate the Tuning control ④ to select an
operating frequency.
Press [MR] ③ to enter Memory Channel mode, then rotate the Tuning control ④ to
select a Memory channel.
Press [F] ⑥ to enter Function mode. Press [F] (1s) to turn the transceiver key lock function
ON and OFF.
Press [TONE] ⑦ to turn the Tone function ON. Each time you press [TONE], the function
cycles through the following: Tone ON ➡ CTCSS ON ➡ DCS ON ➡ Cross Tone ON ➡
OFF.
7
Advertisement
Table of Contents
