Where To Install It - Asko DC 7181 Use And Care Manual

Where to install it

If the drying cabinet is to be built in, a

connection to an exhaust ventilation duct
must be available.
There should be an earthed plug-in

electric outlet socket within a distance
of 2 metres from the upper part of the
drying cabinet. The drying cabinet has a
2 metre long earthing cable with a plug
connected to it. If the socket is not placed
as mentioned above, the position of the
drying cabinet should be adjusted so that
no extension cable needs to be used.
 The electric socket should be easily wit-
hin reach, after the drying cabinet has
been installed. This should be taken into
account even in the event of the drying
cabinet being inbuilt into joinery or similar
fittings. See also the section 'Electrical
installation'.
 The floor should be able to stand the
weight of the cabinet, approximately
60kg.
 The dryer should be level. Cabinet legs
may be adjusted to a max of 2.5 cm to
compensate for an uneven floor.
 The drying cabinet is only intended to be
placed indoors at a temperature above
0° Celsius.
 The drying cabinet must not be installed
in a place where high pressure water is
used for cleaning.
Installation dimensions
595 mm
1840 mm
610 mm
640 mm
7