Connect Ventilation; Electrical Connection - Asko DC 7181 Use And Care Manual

Connect Ventilation

If the dr ying cabinet is inbuilt,
the sleeve coupling is mounted
through the ventilation vent in the
top part of the cabinet mounting
unit after the drying cabinet has
been assembled in its final position.
1. Place the sleeve coupling over the hole in
the top cover plate of the drying cabinet,
matching the screw holes and firmly screw
down the sleeve coupling.
2. If the drying cabinet is inbuilt, connect the
rigid ventilation pipe. If not, the flexible
hose, delivered with the product, (only
certain markets), should be pressed secu-
rely into place. Consult the earlier section
'Ventilation alternatives', on page 9.

Electrical Connection

Refer the earlier section 'Electrical require-
ments', on page 8.
18
The sleeve coupling is designed to
be securely screwed into the top
cover plate of the drying cabinet by
means of two screws.There are pre-
drilled holes in the sleeve coupling
and the top cover plate. Attachment
screws are delivered with the product.
1. Sleeve coupling
1