Performance - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
On the Performance Settings page the users can configure more advanced settings concerning the wireless signal and hosting.
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to enable or disable
Wireless
the wireless function.
Click the drop-down menu to select the wireless
Wireless Mode
mode.
y 2.4GHz band supports: Mixed 802.11b, 802.11g,
802.11n; Mixed 802.11b, 802.11g; and 802.11n
Only.
y 5GHz band supports: Mixed 802.11n, 802.11a;
802.11a Only; 802.11n Only; and Mixed
802.11ac.
Please note that when backwards compatibility
is enabled for legacy (802.11a/g/b) clients,
degradation of 802.11n wireless performance is
expected.
When Wireless Mode is set to Mixed 802.11b,
Data Rate*
802.11g (for 2.4GHz) and 802.11a Only (for
5GHz), click the drop-down menu to indicate
the base transfer rate of wireless adapters on
the wireless LAN. The AP will adjust the base
transfer rate depending on the base rate of
the connected device. If there are obstacles or
interference, the AP will derate the transfer rate.
Beacons are packets sent by an access point
Beacon Interval (40-500)
to synchronize a wireless network. Specify
a value in milliseconds. The default (100) is
recommended. Setting a higher beacon interval
can help to save the power of wireless clients,
while setting a lower one can help a wireless
client connect to an access point faster.
D-Link DAP-3666 User Manual

Performance

30