D-Link NUCLIAS CONNECT DAP-3666 User Manual page 11

Wireless Basics
Method 2 - Powered by PoE kit
1. Connect one end of an Ethernet cable into the Data In port on the PoE injector and the other end into one port on your switch, router, or
computer.
2. Connect one end of an Ethernet cable into the P+Data Out port on the PoE base unit and the other end into the LAN1 (PoE) port on the
DAP-3666 access point.
3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter.
4. Connect the power cable to the power adapter and then connect the other end into a power outlet.
D-Link DAP-3666 User Manual 11