D-Link DAP-3666 Quick Installation Manual
Nuclias connect ac1200 wave 2 outdoor
Hide thumbs
Also See for DAP-3666:
- User manual (106 pages) ,
- Quick installation manual (7 pages) ,
- Quick installation manual (16 pages)
Related Manuals for D-Link DAP-3666
Summary of Contents for D-Link DAP-3666
- Page 1 Quick Installation Guide Nuclias Connect AC1200 Wave 2 Outdoor Access Point DAP-3666 LAN2 LAN1(PoE) Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Before You Begin Hardware Overview This installation guide provides instructions LED Indicators for installing the DAP-3666 on your network. Additional documentation is also available on the D-Link support website. LAN2 LAN1(PoE) • Nuclias Connect Manual: For additional information and instructions on how to configure the device using Nuclias Connect. -
Page 4: Manual Configuration
Enter dap3666.local in the address field Installation of your browser. Log in to the administration user interface. The default login information is The DAP-3666 can be powered using one of the following two methods: Username: admin Password: admin Using Power over Ethernet (PoE) -
Page 5: Mounting On A Pole
Log in to the administration user interface. The default login information is Username: admin Password: admin Mounting Figure 6: Mounting the Device Align and slide the DAP-3666 down so that the mounting plate securely locks to Sealing Gland Sealing the DAP-3666. - Page 6 DAP-3666 using the included screw. Figure 9: Attaching the Mount Screw Use the included mount screw (hexagonal hole) to lock the DAP-3666 to the pole/ wall mount. Figure 12: Attaching the Grounding Wire Tighten the grounding wire (green-and- yellow, 18AWG) to the DAP-3666 until it is securely attached.
- Page 7 Figure 13: Attaching the Grounding Wire Attach the other end of the grounding wire to either the wall or pole mount. Ensure that the wall or pole mount is connected to an electrical ground. dlink.com/support TECHNICAL SUPPORT DAP-3666 Quick Installation Guide...
-
Page 8: Federal Communication Commission Interference Statement
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 5.84 watts Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. - Page 9 Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link Nuclias product or marketing information, please visit the website http://www.dlink.com or https://www.nuclias.com. The D-Link Limited Lifetime Warranty information is available at http://www.dlink.com/warranty...
- Page 10 Notes...
- Page 11 Notes...
- Page 12 Notes...
- Page 13 Notes...
- Page 14 Notes...
- Page 16 Ver. 1.01(WW)_130x183 2020/01/17 5300-00007657-01W...