Performance - D-Link NUCLIAS CONNECT DAP-2680 User Manual

Web User Interface
On the Performance Settings page the users can configure more advanced settings concerning the wireless signal and hosting.
Wireless Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Wireless Click the drop-down menu to enable or disable
the wireless function.
Wireless Mode Click the drop-down menu to select the wireless
mode.
y 2.4GHz band supports: Mixed 802.11n,
802.11g and 802.11b; Mixed 802.11g and
802.11b; and 802.11n Only.
y 5GHz band supports: Mixed 802.11n,
802.11a; 802.11a Only; 802.11n Only; and
Mixed 802.11ac.
Please note that when backwards compatibility
is enabled for legacy (802.11a/g/b) clients,
degradation of 802.11n wireless performance is
expected.
Data Rate* When Wireless Mode is set to Mixed 802.11g
and 802.11b (for 2.4GHz) and 802.11a
Only (for 5GHz), click the drop-down menu
to indicate the base transfer rate of wireless
adapters on the wireless LAN. The AP will
adjust the base transfer rate depending on the
base rate of the connected device. If there are
obstacles or interference, the AP will derate the
transfer rate.
D-Link DAP-2680 User Manual

Performance

27