Wds Mode - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to select WDS.
Operation Mode
Enter the name of Service Set Identifier (SSID)
Network Name (SSID)
up to 32 characters and is case-sensitive.
This option is unavailable in WDS mode.
Auto Channel Selection
Click the drop-down menu to select the desired
Channel
channel. The function is only available when
Auto Channel Selection is Disable.
Note: The wireless adapters will automatically
scan and match the wireless settings.
Click the drop-down menu to select 20 MHz,
Channel Width
Auto 20/40 MHz or Auto 20/40/80 MHz.
Select 20 MHz if you are not using any 802.11n
wireless clients. Auto 20/40 MHz allows you
to connect to both 802.11n and 802.11b/g or
802.11a wireless devices on your network.
Enter the MAC addresses of the APs on your
AP MAC Address
network that will serve as bridges to wirelessly
connect multiple networks.
Click Scan to search for available wireless
Site Survey
networks, then click on the available network
that you want to connect with.
D-Link DAP-3666 User Manual

WDS Mode

19