Qos - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-3666 supports
four priority levels.
Note: Bandwidth Optimization is disabled if QoS is enabled.
Check the box to allow QoS to prioritize traffic.
Enable QoS
By default this feature is disabled.
Enter the downlink bandwidth in Mbits per
Downlink Bandwidth
second. This value is entered in the Uplink/
Downlink Settings window.
Enter the uplink bandwidth in Mbits per second.
Uplink Bandwidth
This value is entered in the Uplink/Downlink
Settings window.
Click the drop-down menu to select the level of
ACK/DHCP/ICMP/DNS
priority for the selected rule.
Priority
Click the drop-down menu to select the level of
Web Traffic Priority
priority for the selected rule.
Click the drop-down menu to select the level of
Mail Traffic Priority
priority for the selected rule.
Click the drop-down menu to select the level of
Ftp Traffic Priority
priority for the selected rule.
Click the drop-down menu to select the level of
User Defined-1/2/3/4
priority for the selected rule.
Priority
Click the drop-down menu to select the level of
Other Traffic Priority
priority for the selected rule.
Click to save the updated configuration.
Save
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

QoS

75