Table Of Contents - Task Force Tips Typhoon Series Instructions For Installation, Safe Operation And Maintenance

1.0 MEANING OF SAFETY SIGNAL WORDS
2.0 SAFETY
3.0 GENERAL INFORMATION
3.1 SPECIFICATIONS
3.2 OPERATING ENVELOPE
3.3 USE WITH SALT WATER
3.4 VARIOUS MODELS AND TERMS
3.5 INLETS AND OUTLETS
3.5.1 FLANGES
3.5.2 NPT FEMALE
3.5.3 BSP MALE
3.5.4 MATING PRODUCTS
3.5.5 OUTLET OPTIONS
3.6 OVERALL DIMENSIONS
4.0 INSTALLATION
4.1 ELECTRICAL INSTALLATION
4.2 STRUCTURAL REQUIREMENTS
4.3 INLET FITTING OR EXTEND-A-GUN
INSTALLATION
4.4 TWO PIECE CLAMP ROTATIONAL LOCK
INSTALLATION
4.5 CABLE ROUTING FOR EXTEND-A-GUN
4.6 HORIZONTAL ROTATION TRAVEL STOPS
4.7 ELEVATION TRAVEL STOPS
4.8 NOZZLE INSTALLATION
4.9 PRESSURE GAUGE PORT
4.10 TILLER HANDLE INSTALLATION
4.11 DRAINING RESIDUAL WATER
4.12 LADDER MONITOR INSTALLATION
5.0 OPERATING INSTRUCTIONS
5.1 HANDWHEEL HORIZONTAL ROTATIONAL
CONTROL
5.2 HANDWHEEL ELEVATION CONTROL
5.3 TILLER BAR CONTROL
5.4 RECOMMENDED PARK POSITION
5.5 OVERRIDE KNOBS
©Copyright Task Force Tips LLC 2004-2020

Table Of Contents

6.0 FLOW CHARACTERISTICS
6.1 YST-4NN STACKED TIPS FLOW AND REACH
6.2 MST-4NJ STACKED TIPS FLOW AND REACH
6.3 EFFECTS OF ELEVATION AND WIND ON
STREAM REACH
6.4 AUTOMATIC MASTERSTREAM NOZZLES
6.5 FRICTION LOSS
6.6 STREAM STRAIGHTENERS
6.6.1 STREAM STRAIGHTENERS WITH
6.6.2 STREAM STRAIGHTENERS WITH FOG
7.0 WARRANTY
8.0 MAINTENANCE
8.1 SERVICE TESTING
8.2 LUBRICATION
8.3 TROUBLESHOOTING
8.4 REPAIR
9.0 EXPLODED VIEWS AND PARTS LISTS
10.0 OPERATION AND INSPECTION CHECKLIST
3
STACKED TIPS
NOZZLES
LIY-050 August 17, 2020 Rev14