Sending A Multicast Page; No Hold Conference - Avaya J169 Manual

Advanced features

Sending a multicast page

About this task
You can send a multicast page to a group of users by activating the Multicast Paging group on the
Phone screen. If the required group is not added on this screen, you can access all multicast page
groups configured for your phone in the Features menu.
Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
• Press Headset.
2. (Optional) If you use the handset, press End Call to cancel dialing.
3. On the Phone screen, scroll to the required multicast page group, and press Select.
The phone displays the Paging <group name> box.
4. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.

No Hold Conference

With the No Hold Conference feature, you can add participants to your call while continuing your
active conversation. The No Hold Conference feature lets you create a conference call without
putting any call participant on hold.
For example, if you press the administered No Hold Conference button and then dial an
extension the participant that answers the call joins the no hold conference.
Using the No Hold Conference button you can add more participants to the no hold conference.
The administrator can pre-configure only one number on System Manager. When you press the
No Hold Conference button, the call is placed to the pre-configured number when the participant
answers the call joins the no hold conference.
If the participants do not answer the call within the configured time-out duration Avaya J100 Series
IP Phones will display the appropriate message on the phone screen.
February 2021 Using Avaya J169 and J179 SIP IP Phones in Avaya Aura
Comments on this document? infodev@avaya.com
®
88