Panasonic TY-ST85P12 Installation Instructions Manual page 18

Assembly
2. Slip the left and right supports
of stand base
mounting fixtures
3. Mount the 4 support mounting hexagon bolts
onto the support
Affix them securely from the front with flanged
cap nuts .
•
The bolt and nuts should be securely tightened
to the torque given below.
(12~14 N•m)
3. Preparation and installation of plasma display
Caution
•
The plasma display is heavy so use a device (machine) that will
enable the plasma display to be lowered in place.
•
The controls of the plasma display panel are located on the right
side panel so ensure that they are not bumped into or knocked
during the installation process.
•
Make sure that the stand hooks are firmly secured.
1. To lift the plasma display, connect the suspension device's
hook to the eye bolt in the center of the plasma display.
18
onto the poles
from the top so that the display
face the front.
from the back.
Display mounting fixtures
Front
Stand base
Flanged cap nuts
Front
Supports
Rear
Support mounting hexagon
bolts
Stand hooks