Dos Modules; Connecting A Dos Module; Dispensing Liquids - Miele PG 8504 Operating Instructions Manual

Connecting a
DOS module
Dispensing liquids For adjusting the dispensing concentration, see "Further settings/
Adding and dispensing chemical agents

DOS modules

If required an additional external dispensing module (DOS module)
can be fitted retrospectively for liquid chemical agents.
External DOS modules are fitted by Miele Service or a suitably
qualified and approved technician. Internal dispensing systems
cannot be retrospectively fitted.
The DOS module is supplied with its own installation instructions.
 Before fitting the DOS module, compare the connection data
(voltage and frequency) on the data plate with that on the data
plate of your machine. If the data does not match, the module
could sustain damage. If in any doubt, consult an electrician.
 Power supply for DOS 1, cleaning agent.
 Connection for dispensing hose.
Connect the module to the electricity supply.

To connect the dispensing hose, release the hose clip on a free

connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a

hose clip.
Unused connectors must be blanked off with safety caps to
prevent the leakage of wash fluid.
Dispensing systems".
47