Protected Setup Navigation Buttons - AMX Modero ViewPoint MVP-7500 Operation/Reference Manual

Setup Pages
Protected Setup Page (Cont.)
System Recovery (Cont.):
Reboot Panel:
Docking Station:
Channel Code
Channel Port
Level Port
Channel Code
FIG. 51 Function Show example

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 52) appear on the left of the panel screen when the
Protected Setup page is currently active.
FIG. 52 Protected Setup Navigation Buttons
62
• Remove User Pages - allows you remove all TPD4 touch panel pages
currently on the panel, including the pre-installed AMX Demo pages. This
option invokes a Confirmation dialog, prompting you to confirm your selection
before removing the panel pages.
Note that the YES button on the Confirmation dialog is disabled for 5 seconds
as additional protection against accidentally resetting the panel or removing
the panel pages.
Pressing this button causes the panel to reboot after saving any changes.
• Dock Status - illuminates when the MVP is docked and communicating with
the Docking Station.
• Undock Panel - forces the docking station to release the MVP without
requiring a User Access username or password.
• Disable Docking Station LED - disables the display of the LEDs on the
docking station.
3,132
BUTTON
2,8 3,50
Address Port
Address Code
Closes the Protected Setup page
Press to access the G4 Web Control page where you can enable or disable remote
display and control of the panel via a web-enabled PC running a VNC client.
Press to access the Passwords Setup page where you can specify firmware
and user access passwords
.
Press to access the Calibration page where you can calibrate the panel-
.
Press to access the Wireless Settings page where you can configure wireless
connection settings.
Press to access the System Settings page where you can configure
communication settings for the NetLinx Master and the panel
MVP Modero ViewPoint Touch Panels