Password Setup Page - AMX Modero ViewPoint MVP-7500 Operation/Reference Manual

Setup Pages
G4 Web Control Page
G4 Web Control Timeout:
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 38 for
instructions on using the G4 Web Control page with the web-based NetLinx Security
application.

Password Setup Page

The options on the Password Setup page allow you to assign the passwords required for users to access
the Protected Setup page, and to release the MVP from a MVP-TDS or MVP-WDS docking station
(FIG. 54).
FIG. 54 Password Setup page
Features on this page include:
Password Setup Page
Back:
Connection Status icon:
In Panel Password
Change:
64
Sets the length of time (in minutes) that the panel can remain idle (no cursor
movements) before the G4 Web Control session is terminated.
• Minimum value = 0 minutes (panel never times out)
• Maximum value = 240 minutes (panel times out after 240 minutes)
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Accesses the alphanumeric values associated to particular password sets.
• The PASSWORD 1, 2, 3, 4 and 5 (protected) buttons open a keyboard to
enter alphanumeric values associated to the selected password group.
Note: Clearing Password #5 removes the need to enter a password before
accessing the Protected Setup page.
MVP Modero ViewPoint Touch Panels