System Settings Page
The System Settings page (FIG. 66) displays sets the NetLinx Master's communication settings.
FIG. 66
System Settings page
The elements of this page include:
System Settings Page Elements
Back:
Connection Status icon:
Master Connection:
Type
MVP Modero ViewPoint Touch Panels
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Sets the NetLinx Master communication values:
Sets the NetLinx Master to communicate with the panel via either USB or Ether-
net. This is based on the cable connection from the rear.
Note: ICSNet is not a supported option on this panel.
• Ethernet is a CAT-5 cable (10/100Base T terminated in an RJ-45 connector)
used to network computers together and is used in most LAN (local area
networks). This description is also used to refer to both wired and wireless
communication.
• USB option cannot be used on Modero panels which are not equipped with a
rear USB port.
Setup Pages
85