AMX Modero ViewPoint MVP-7500 Operation/Reference Manual page 68

Setup Pages
Batteries Page (Cont.)
Very Low Battery Warning: The UP/DN buttons adjust the time value (in minutes) available on the battery
Battery Status:
60
before the panel displays a very low battery warning (indicating near-term panel
shutdown).
• Range = 3 - 15, default = 5 min.
• This value cannot exceed the Low Battery Warning value.
Note: This field applies to MVP-BP batteries installed in the panel.
• The Combined Charge Status bargraph indicates the combined power
charge available from batteries installed in the panel.
• The Battery One Charge Status bargraph indicates the power charge
available on the Slot 1 battery (in the panel).
• The Battery Two Charge Status bargraph indicates the power charge
available on the Slot 2 battery (in the panel).
• The Battery Dock 1 Charge Status bargraph indicates the power charge
available on the docking station's battery #1.
• The Battery Dock 2 Charge Status bargraph indicates the power charge
available on the docking station's battery #2.
Note: If no batteries are being charged within the docking station's battery com-
partments, or the MVP is not connected to a docking station; both Battery Dock
Charge Status fields are left blank.
• The Docking Station Version field indicates the firmware version currently
installed on the docking station.
• The Battery Level Port field indicates the port being used to report charge
status levels back to the NetLinx Master (set in TPDesign4).
• The Battery Level field indicates the level being used to report status levels
back to the NetLinx Master (set in TPDesign4).
MVP Modero ViewPoint Touch Panels