Protected Setup Pages - AMX Modero ViewPoint MVP-7500 Operation/Reference Manual

Protected Setup Pages

The Protected Setup page (FIG. 50) provides secured access to advanced panel configuration options,
including communication and security settings.
Enter the factory default password (1988) into the password keypad to access this page.
FIG. 50 Protected Setup page showing default values
Features on the Protected Setup page include:
Protected Setup Page
Navigation Buttons:
Back:
Connection Status icon:
Device Number:
Options:
System Recovery:
MVP Modero ViewPoint Touch Panels
The buttons along on the left side of the page provide access to secondary Pro-
tected Setup pages (see following sections).
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Opens a keypad used to view/set the device number of the panel.
• Function Show - toggles the display of the channel port, channel code, level
port and level code on all touch panel buttons (see FIG. 51).
• Page Tracking - toggles the page tracking function. When enabled, the panel
reports page data to the NetLinx Master.
• Telnet - enables/disables the panel's telnet server (to allow direct telnet
communication to the panel).
• Front Button Setup Access - activates the two lower buttons on the front of
the panel for accessing the Setup and Calibration pages (see FIG. 42 on
page 51). The default setting is On.
- Press and hold these buttons for 3 seconds to access the Setup page.
- Press and hold these buttons for 6 seconds to access the Calibration page.
• Reset System Settings - deletes all of the current configuration parameters
on the panel (including IP Addresses, Device Number assignments,
Passwords, and other presets). This option invokes a Confirmation dialog,
prompting you to confirm your selection before resetting the panel.
Setup Pages
61