Step 4: Install The Compact Flash Memory Card Upgrade - AMX Modero NXT-1500VG Operation/Reference Manual
Modero vg-series g4 touch panels
Hide thumbs
Also See for Modero NXT-1500VG:
- Dimension manual (1 page) ,
- Operation/reference manual (256 pages) ,
- Instruction manual (187 pages)
Table of Contents
Advertisement
Touch Panel Accessories
NXA-RGB card
screw locations (4)
RGB I/O
connector plate
FIG. 19
Location of the NXA-RGB card and I/O plate
Step 4: Install the Compact Flash Memory Card upgrade
1. Discharge any static electricity from your body by touching a grounded metal object and then locate
the existing Compact Flash card (factory-shipped with 128 MB) on the main board (FIG. 20 for
Table Top panels and FIG. 23 for Wall Mount panels).
NXA-PCI80211G
Eight Housing
Screws
FIG. 20
Location of the Compact Flash card and I/O plate on NXT
2. Insert the tip of a grounded flathead screwdriver into one of the card removal grooves (located on
either side of the card), and gently pry the card out of the slot (FIG. 21). Repeat this process on the
opposite card removal groove. This alternating action causes the card to "wiggle" away from the
on-board connector pins.
3. Grip the old card by its sides and then carefully pull it out of the slot.
40
NXA-RGB card
wireless card
location
I/O connector
plate
Outer Housing
Outer Housing
Compact Flash card
VG-Series Modero Touch Panels
Advertisement
Table of Contents
