Remove Blowout Baffle; Install Baffles - Briggs & Stratton 1695354 Operator's Manual

Remove Blowout Baffle

1.Remove and discard short blowout baffle (C, Figure
4), carriage bolts (B) and locknuts (D) from mower
deck (A).
D
C
Figure 4. Baffle Removal
A. Mower Deck
B. Carriage Bolts,5/16-18 x 3/4
C. Blowout Baffle, Short
D. Nuts, Whizlock, 5/16-18 x 3/4
6
B
A
D

Install Baffles

1. Determine which baffle to use. See Figure 5
Chart.
2. Lift side discharge chute (H, Figure 6).
3. Insert baffle (F) through discharge opening and
position baffle into place.
4. Tighten carriage bolts (A) and nuts (E) on baffle
(F).
5. Tighten carriage bolt (B) and nut (E) on baffle (F).
6. Position baffle (G) into place.
7. Tighten carriage bolts (C) and nuts (E) on baffle
(G).
8. Tighten carriage bolts (D) and nuts (E) on baffle
(G).
44" Mower Deck
"A" RH side 26-1/4" long
"B" LH side 24-7/8" long
"A"
Figure 5. Baffle Chart
50" Mower Deck
RH side 29-3/4" long
LH side 27-3/4" long
"B"