Assembly; Baffle Installation - Briggs & Stratton LT 125 Operator's Manual

Before beginning any service work turn
WARNING:
off the PTO, set the parking brake, turn off the ignition,
and disconnect the spark plug wire(s).
Baffl e Installation
1. Lift side discharge chute (A, Figure 1).
2. Insert baffl e (B) through discharge opening and position
baffl e inside deck.
3. On left side of baffl e, insert carriage bolt (C) through both
hole of baffl e (B), mower deck and spacer (D). Secure
with nut (E).
4. On right side of baffl e, insert carriage bolt (C) through
both hole of baffl e (B), and mower deck. Secure with nut
(E).
B
D
E
Figure 1
5

Assembly

A
C