Assembly; Install Mounting Plates & Spacers (Broadmoor/1600/2600/Lt Series); Prestige/1800/2800/Gt Series - Briggs & Stratton 1695354 Operator's Manual

Assembly

INSTALL MOUNTING PLATES -
BROADMOOR / 1600 / 2600 / LT
SERIES
Install Plates & Spacers
1. Mount the side brackets (C, Figure 1) to both
sides of the frame using the holes shown. Secure
with one 3/8-16 x 1 capscrew (D), 3/8 lockwasher
(B), and 3/8-16 nut (A) per side.
2. Install the rear spacers (C, Figure 2). Secure with
two 1/2-13 x 2-1/2 capscrews (E), washers (D),
spacers (C), and 1/2-13 nylock nuts (A) per side.
INSTALL MOUNTING SPACERS -
CONQUEST / 1700 / 2700 / YT &
PRESTIGE / 1800 / 2800 / GT
SERIES
Install Spacers
1. Install the rear spacers (C, Figure 3). Secure with
two 1/2-13 x 2-1/2 capscrews (E), washers (D),
spacers (C), and 1/2-13 nylock nuts (A) per side.
Figure 1. Install Side Brackets
A. Nut, 3/8-16
B. Lockwasher, 3/8
C. Side Bracket
D. Capscrew, 3/8-16 x 1
A
Figure 2. Install Rear Spacers
A. Nylock Nuts, 1/2-13
B. Capscrew, 1/2-13 x 2-1/2
C. Spacers
D. Washers, 1/2
A
Figure 3. Install Rear Spacers
A. Nylock Nuts, 1/2-13
B. Capscrews, 1/2-13 x 2-1/2
C. Spacers
D. Washers, 1/2
A
B
C
D
C
D
D
B
C
D
B
D
5