Install Collector Bags; Install Lower Discharge Chute - Briggs & Stratton 1695354 Operator's Manual

INSTALL COLLECTOR BAGS

1. Raise the cover (A, Figure 13).
2. Attach collector bags (B) using grass bag hanger
(C) to bag hanger post (D).
A
Figure 13. Install Collector Bags
A. Cover
B. Collector Bag
C. Grass Bag Hanger
D. Bag Hanger Posts
C
D
B

INSTALL LOWER DISCHARGE CHUTE

1.Lift discharge deflector up (D, Figure 14).
2. Insert lower chute rod (A) into mounting plate (B).
3. Pull rubber strap (C) and secure by placing hole
closest to knob in strap completely over locknut
(E).
A
B
Figure 14. Install Lower Discharge Chute
A. Lower Chute Rod
B. Mounting Plate
C. Rubber Strap
D. Discharge Deflector
E. Locknut
C
D
E
11