Install Upper Tube To Cover; Install Middle Tube - Briggs & Stratton 1695354 Operator's Manual

C
A
Figure 15. Install Upper Tube to Cover
A. Upper Tube
B. Cover
C. Ridge, Upper Tube
D. Ridge Cutout
INSTALLING UPPER & MIDDLE TUBES
1. Slide the upper tube (E, Figure 15) into cover (B)
aligning ridge (C) with cutout (D) as shown.
2. See Figure 16 for correct hole location and secure
the upper tube (E) to middle tube using screw (F).
2. Slide middle tube (D, Figure 16) into upper tube
(E).
3. Slide middle tube (D) over boot (A). Pull strap (B)
and place hole completely over pin (C).
12
D
B
44" Frame Hung Mowers
50" Frame Hung Mowers
44" Free Floating Mowers
50" Free Floating Mowers
D
B
C
A
Figure 16. Install Middle Tube
A. Lower Chute
B. Strap, Rubber
C. Pin
D. Middle Tube
E. Upper Tube
F. Screw, 1/4 x 3/4
E
F