Cable Menu Page; Camera Pages - AMX MAX-MMS-01S Instruction Manual

Touch Panel Screens

Cable Menu Page

The Cable Menu page (FIG. 23) is accessed by pressing the Menu button on the Cable Tuner page.
This page contains buttons that control menu navigation and selection functions, in addition to
guide, favorites, info, select, and exit commands. There are also page flip buttons to the Cable
Tuner, and Channel Presets pages.
FIG. 23 Cable Menu page

Camera Pages

This set of pages provide control for the stand-alone cameras (added within the DXP-PRO wizard).
Stand-alone refers to the external nature of the cameras in regards to the video conferencer. The
Camera page (FIG. 24) is displayed after pressing the Camera menu bar button. This page
contains the various buttons used to control camera pan, tilt, and zoom, as well as both preset
settings and recall information. The feedback for these buttons is momentary and based on which
button is currently being pressed.
If there are multiple cameras devices available for selection within the project, the Select a Camera
Control dialog (FIG. 15) appears when this device type is selected. This action then prompts you to
choose which camera to control and then loads the corresponding device control page for the
selected camera.
14 DXP-PRO v1.1 - User Interface Guide