Switcher Page (Audio/Video); Audio Conferencing Pages; Audio Conference - Dialing Page - AMX MAX-MMS-01S Instruction Manual

Touch Panel Screens

Switcher Page (Audio/Video)

The Switcher page is where the system's A/V Switchers are controlled.
Press the Switcher menu bar button to open the Switcher page (FIG. 16). This page contains
buttons for both selecting and connecting the inputs and outputs. You can also connect either Audio
only or Video only (break-away switching). If multiple switchers are used in the system, the inputs
and outputs for both switchers are displayed on the Switcher page. When using multiple switchers,
once an input is selected only the valid outputs are dynamically displayed. This is done to prevent a
user from attempting to switch sources to destinations that are unroutable to one another. The
Switcher page also displays text on each output button indicating the currently connected source.
FIG. 16 Switcher page

Audio Conferencing Pages

These pages vary based on which supported conference device is selected within the DXP-PRO
wizard. These pages were created in this manner to match (as closely as possible) the functionality
of the selected device. The main pages used for Audio Conferencing are described below.

Audio Conference - Dialing Page

If the Audio Conference device was configured in the DXP-PRO wizard to include dialing
capabilities, the Audio Conference Dialing page (FIG. 17) can be accessed by pressing the Audio
Conf menu bar button. This page contains the buttons necessary to dial numbers, redial, connect or
disconnect a call, etc.
10 DXP-PRO v1.1 - User Interface Guide