Relays Page; Macro Pages - AMX MAX-MMS-01S Instruction Manual

Touch Panel Screens

Relays Page

This pages provides control of the Relay-controlled devices (added within the wizard) (FIG. 60).
The Relays page is displayed after pressing the Relays menu bar button. This page contains buttons
that control the relays as they were configured in the wizard. The status of the relays are also
displayed.
FIG. 60 Relay page

Macro Pages

This set of pages is where the Macros (defined within the wizard) are displayed and executed. The
Macros page (FIG. 61) is displayed after pressing the Macros menu bar button. When a macro
button is selected, it will change to it's on state until the macro has finished executing. If, however,
the same button is pressed while running the macro, the remaining execution will be terminated,
and the button's status will return to the off state. If there are more than sixteen macros defined in
the system there is also a page flip button to access the remaining macros (FIG. 62).
FIG. 61 Macros page
36 DXP-PRO v1.1 - User Interface Guide