Table of Contents
Advertisement
5.4.2 Prefilters and / or bag filters in filter frame
Filters are supplied loose and have to be fixed by clips as follows:
1. Take the filter clips, which are included in the supply and are attached in brackets on the filter
frame (Figure 85).
2. Four filter clips have to be inserted in the respective brackets according to Figure 86.
3. Finally, the filter must be fixed by the clips in the filter frame (Figure 87).
Figure 85: Delivery of the clips
Bag filters are installed similarly. Bags shells hang vertically.
5.4.3 Laterally removable bag filters with clamping mechanism
When inserting and fixing the laterally removable bag filters with clamping mechanism has to be
proceeded cautiously, so as not to damage them. The installation of laterally removable bag filters
must be carried out as follows:
1. First, move all levers of the clamping rails toward the door opening (Figure 88).
2. Slide one filter after the other in the filter frame (Figure 89).
3. Press the last filter of the row against the rear panel. Then press with the lever the filter cells
against the sealing (Figure 90).
Figure 88: Loosen the clamps
Attention: For soft bags the lower bags of the filter cells are to lift up in order to
prevent damage with the clamping system (Figure 91)!
Figure 86: Insertation of the clips
Figure 89: Slide in the filters
Figure 87: Fixed filter
Figure 90: Clamping the filters
Advertisement
Table of Contents
