Table of Contents
Advertisement
6.3.2 Ball siphons
If ball siphons with the below shown design are included in the delivery from TRANE, then the fol-
lowing items should be observed during installation:
Depending on the suction side or pressure side mounting position, the siphon body has to be in-
stalled so that the direction of the arrow (see Figure 107) corresponds to the flow direction.
- Pa
=
+ Pa
=
Figure 107: Observe the mounting position - flow direction according to the arrow
Siphon on suction side (in direction of airflow before the fan)
Siphon on pressure side (in direction of airflow after the fan)
suction side
pressure side
Figure 108: Suction side execution
Advertisement
Table of Contents
