Advertisement
Basic Operations
Connection Example
DMX-compatible lighting
equipment
Computer for configuring DMX channels
* Do not use a USB cable that is designed only for
charging a device. Charge-only cables cannot
transmit data.
Turning the Power On
* To prevent malfunction and equipment failure,
always turn down the volume, and turn off all the
units before making any connections.
1.
Mute the audio output of the devices
connected to this unit.
2.
Connect the included adaptor to the DC IN jack
of this unit, and plug the adaptor into an AC
outlet.
This turns the power on.
3.
Adjust the volume of the external devices.
MIDI device
Video source device
Turning the Power Off
1.
Mute the audio output of the external devices.
2.
Disconnect this unit's adaptor from the power
outlet, and turn off the power of this unit.
NOTE
Before turning the unit on/off, always be sure to
turn the volume down. Even with the volume
turned down, you might hear some sound when
switching the unit on/off. However, this is normal
and does not indicate a malfunction.
Audio input/output device
Display for video output
3
Advertisement
