Set Up Konect Pakbus Router - Campbell CR300 Series Getting Started Manual

3.1.3.2 Set up Konect PakBus Router

1. Sign in to www.konectgds.com
received emails. Once logged in, you will be at the Welcome page.
2. Click Devices and services
Router Code. Enter your complimentary Router Code found on the included card with your
cellular-enabled device and click Submit.
3. The next screen shows the assigned DNS address and Port for the router. Enter a TCP
Password and select a unique PakBus Address for your data logger.
TIP:
Make note of this information; it will be required for data logger configuration as well
as LoggerNet setup. Please note your DNS, Port, TCP Password and PakBus address;
you will need them later.
using your Passport ID and Password found in the two
on the command bar to the left and select Redeem PakBus
3. Cellular communications option 7