Working With Data; Default Data Tables - Campbell CR300 Series Getting Started Manual

6. Working with data

6.1 Default data tables

By default, the data logger includes three tables: Public, Status, and DataTableInfo. Each of these
tables only contains the most recent measurements and information.
The Public table is configured by the data logger program, and updated at the scan
l
interval set within the data logger program, It shows measurement and calculation results
as they are made.
The Status table includes information about the health of the data logger and is updated
l
only when viewed.
The DataTableInfo table reports statistics related to data tables. It also only updates when
l
viewed.
User-defined data tables update at the schedule set within the program.
l
For information on collecting your data, see
Use these instructions or follow the
LoggerNet users, select the Main category and Connect
data logger from the Stations list, then click Connect
using the Table Monitor.
PC400 and PC200Wusers, click Connect
a data logger, values from the Public table are displayed. To view data from other tables, click
Add , select a table or field from the list, then drag it into a cell on the Monitor Data tab.
Collecting data
Connect Window tutorial
. Once connected, select a table to view
, then Monitor Data. When this tab is first opened for
(p. 20).
to monitor real-time data.
on the LoggerNet toolbar, select the
6. Working with data 19