Sending A Program To The Data Logger - Campbell CR300 Series Getting Started Manual

Compact datalogger

Hide thumbs Also See for CR300 Series:

Table of Contents

5. Sending a program to the

data logger

TIP:

It is good practice is to always retrieve data from the data logger before sending a program;

otherwise, data may be lost. See

Some methods of sending a program give the option to retain data when possible. Regardless of

the program upload tool used, data will be erased when a new program is sent if any change

occurs to one or more data table structures in the following list:

Data table name(s)

Data output interval or offset

Number of fields per record

Use the following instructions or watch the

1. Connect the data logger to your computer.

2. Using your data logger support software, click Send New... or Send Program (located in the

Current Program section on the right side of the window).

3. Navigate to the program, select it, and click Open. For example: navigate to

C:\Campbellsci\SCWin and select MyTemperature.CR300.

4. Confirm that you would like to proceed and erase all data tables saved on the data logger.

The program will send and compile.

5. Review the Compile Results window for errors, messages and warnings.

Collecting data

(p. 20) for detailed instruction.

Number of bytes per field

Field type, size, name, or position

Number of records in table

Quickstart part 4 video

5. Sending a program to the data logger

Table of Contents