Set Up Loggernet - Campbell CR300 Series Getting Started Manual

10. Click Apply to save the changes. Verify the settings in the summary window.
(Recommended) Save a copy of the settings to a file on the computer. Click OK.
11. Click Disconnect and close Device Configuration Utility.

3.2.1.2 Set up LoggerNet

The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > IPPort.
2. Select PakBusPort and pbRouter.
3. Add a data logger to the pbRouter.
4. From the Entire Network, on the left side, select the IPPort. Enter the Konect PakBus Router
DNS address and port number as noted in the Konect PakBus Router setup
PakBus Router
with a colon separating DNS and Port. For example, axanar.konectgds.com:pppp where
pppp is the port number.
(p. 7)). Enter them into the Internet IP Address field in the format DNS:Port
(Set up Konect
3. Cellular communications option 10