Campbell CR300 Series Getting Started Manual page 13

5. Leave the default settings for the PakBusPort. PakBus Port Always Open should not be
checked. In the TCP Password field enter the TCP Password; this must match the value
entered in the Konect PakBus Router setup and LoggerNet setup.
6. Select the pbRouter in the Network Map and set the PakBus Address to 4070.
7. Select the data logger in the Network Map and set the PakBus Address to match that of the
data logger (default address in the data logger is 1). If a PakBus Encryption Key was entered
during data logger setup, also enter it here. Click Apply to save the changes.
3. Cellular communications option 11