Installation; Modules Using Konect Pakbus Router (Private Dynamic Ip); Configure Data Logger - Campbell CR300 Series Getting Started Manual

Compact datalogger

Hide thumbs Also See for CR300 Series:

Table of Contents

3.2 Installation

3.2.1 Modules using Konect PakBus Router (private

dynamic IP)

3.2.1.2 Set up LoggerNet

3.2.1.3 Test the connection

3.2.1.1 Configure data logger

1. Connect the cellular antenna, if it is not already connected. When using a MIMO antenna

with multiple cellular connections, connect the primary cable to Cellular and the secondary

to Diversity. If the cables are not marked in this way, they can be connected to either

antennna port.

2. Connect to your data logger by using Device Configuration Utility.

3. Cellular communications option

Table of Contents