Table of Contents
Advertisement
im Vertrieb von
Command/response table for special function SIS commands
Command
Delay times
RGB delay (Triple-Action Switching)
Example:
Scaler settings
Output signal
Example:
Output polarity
Example:
Blue screen
Blue screen
(output blue and sync only)
Example:
Edge smoothing
Edge enhancement
Example:
www.camboard.de
CAMBOARD Electronics
The syntax for setting a special function is
(such as 3 for the "set RGB delay" command in the first example below),
value or variable (such as 35 in the first example below), and # is the execute
command. To view a function's setting, use
In the following table the values of the
function. These values are given in the rightmost column.
ASCII Command
(host to scaler)
3*
#
X13
3*35#
6*
#
X5
6*1#
7*
#
X6
7*1#
8*
#
X7
8*1#
16*
#
X7
16*1#
Tel. 07131 911201
Digital Display Scaler • Programmer's Guide
Fax 07131 911203
*
# where
X?
X n
X?
# where
is the function number.
X?
X?
variable are different for each command/
X?
Response
Additional description
(scaler to host)
Dly
Adjustable in 0.01 second steps
X13
up to 50 = 5.0 seconds. 0 = 0.0
seconds (default), 1 = 0.1
seconds, 2 = 0.2 seconds, and so
on.
Dly35
RGB delay set to 3.5 seconds.
Tpo
0 = RGB (default).
X5
1 = Component (Y, R-y, B-y).
Tpo01
RGB output signal.
Pol
0 = H-/V- (default).
X6
1 = H-/V+.
2 = H+/V-.
3 = H+/V+.
Pol01
Example: H-/V+ output
polarity.
Blu
0 = off (normal output).
X7
1 = on (blue video & sync output).
Blu1
Blue & sync output as a tool for
system setup.
Fil
0 = off
X7
1 = on (default)
Fil1
Enable edge smoothing.
ce-info@camboard.de
is the function number
is the
X n
4-9
Advertisement
Table of Contents
