141 Routing Airbag And Pre-Tensioner Wiring - Opel Movano X62 2010 Conversion Manualline

OPEL MOVANO (X62)
141 – ROUTING AIRBAG AND PRE-TENSIONER WIRING
No intervention or modification must be made to elements relating to the vehicle's passive
safety.
The airbag and seatbelt pre-tensioner wire is an integral part of the vehicle's passive safety system units.
Particular attention must therefore be paid before any transformation which may affect their integrity
and generate a customer effect which potentially affects safety (example: unwanted and/or untimely
triggering of the airbags, lack of triggering or delayed triggering in the event of an impact (airbags and
pre-tensioners), untimely triggering of the pyrotechnic restraint systems with the vehicle moving or at a
stop).
The routing for this wiring must be identified on the vehicle. If necessary, before any intervention, install
protection on these sensitive units to preserve their integrity under all circumstances.
Location of the wiring in question:
In blue, the wiring for the sensitive units which make up the vehicle's passive safety system:
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status June 2009
Left-hand drive version
1