104 Adaptation Connector, "Kpd" Option - Opel Movano X62 2010 Conversion Manualline

OPEL MOVANO (X62)
104 – 6 PIN- and 2 PIN-CONNECTOR, OPTION KPD
Before working on the vehicle, refer to the "Electrical Connections" sheet.
This option provides:
- A stand-by connector in the dashboard area.
- A stand-by connector in the right-hand B pillar (lateral zone).
These connectors provide "engine running" information, activate the accelerated idler and provide power
supplies.
1. Dashboard area connector
The connector is located on the left-hand side near to the panel feed-through ring, the passenger
compartment fuse and relay box and the bonnet opening lever.
It is secured on the dashboard wiring using a link. An excess length is provided for the connection.
The connector is in the same position for both left-hand and right-hand drive vehicles.
LOCATION
1
2
1: Connector position 2: Passenger compartment relay and fuse box
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
1
up-to-date data on body guidelines (online body guidelines). Data status June 2010