Opel Movano X62 2010 Conversion Manualline page 67

OPEL MOVANO (X62)
140 – CONNECTION TO THE POSITIVE BATTERY TERMINAL
3. Connection using the midi fuse locations
Two locations are provided for midi-type fuses. For this, special M5 studs from the supplier MTA must be
used.
The following fuses may be used:
Tighten at the recommended torque of 5 Nm ± 15% for the M5 studs and leave at least one spare thread
after tightening.
1: Locations provided for midi-type fuses
2: Locations provided for M5 studs
EXAMPLE OF:
M5 STUD
N.B.:
Tightening torque for M8 nuts on the positive terminal: 12 Nm ± 15%
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status June 2009
30 A midi fuse;
40 A midi fuse.
POSITIVE BATTERY TERMINAL
MIDI FUSE
1
2
3