Assembly Steps; Ez-Flex Base Board Layout - American Megatrends EZ-Flex User Manual

Assembly Steps

The steps for assembling a system that uses the AMI EZ-
Flex Base Board and an EZ-Flex CPU Card are shown in
the following table. Each step is discussed in detail in the
following pages.
Step
1 Set switches.
2 Install SIMMs.
3 Install Base Board.
4 Connect the power supply.
5 Connect the keyboard.
6 Connect the mouse.
7 Connect cables.
8 Install adapter cards.
9 Install floppy disk drives.
10 Perform initial test and configuration.

EZ-Flex Base Board Layout

The graphic on the following page display the layout of the
EZ-Flex Base Board. Refer to this graphic as you assemble
the EZ-Flex system.
AMI EZ-Flex Base Board User's Guide
Action
Turn to
Page 17
Page 17
Page 20
Page 21
Page 25
Page 27
Page 27
Page Error!
Bookmark
not defined.
Page 45
Page 47
15