American Megatrends EZ-Flex User Manual page 93

Hard Disk Format Utility,
Continued
Answer the questions on the screen. The first two questions
are already completed if one disk was selected in Standard
CMOS Setup. Enter C or D in Disk Drive and press
<Enter>. If only one drive was selected in Standard CMOS
Setup, the cursor is on Interleave.
The Disk Drive Type is read from CMOS RAM. The
Interleave factor can be selected manually or determined by
Auto Interleave.
The hard disk drive manufacturer usually provides a list of
bad tracks. Enter these tracks. They are labeled as bad to
prevent data from being stored on them.
The following screen is displayed after entering Y in Mark
Bad Tracks, pressing <Enter>, and selecting add, delete,
revise, or clear from the Bad Track Edit Menu.
Hard Disk Utility Options
AMI EZ-Flex Base Board User's Guide
87