Step 8 Install Adapter Cards - American Megatrends EZ-Flex User Manual

Parallel Port Cable
The parallel cable is a 26-pin berg to 25-pin DB connector
supplied with the AMI EZ-Flex Base Board. The DB
connector is shown below.

Step 8 Install Adapter Cards

The 80486 EZ-Flex EISA base board provides full
compatibility with all IBM XT- or AT-compatible
adapter cards. It has eight EISA slots. The
slots are numbered on the motherboard from SLOT1
through SLOT8. The EISA slots can accept 8- or
16-bit ISA (XT- or AT-compatible) or 16- or 32-
bit EISA adapter cards. The slots are described
below:
Slot
1 - 6
7 – 8
Chapter 4 Installation
36
Description
EISA bus master slot. These slots accept any
EISA/ISA adapter card.
EISA non-bus master slot. These expansion
slots accept only ISA or EISA adapter cards
that do not have EISA bus mastering
capability.