Write To Cmos And Exit; Do Not Write To Cmos Ram And Exit - American Megatrends Enterprise-III User Manual

AUTO DETECT HARD DISK
When enabled, this option displays the parameters for IDE hard disk drives. You can accept or
reject the parameters. If accepted, these parameters are displayed in STANDARD CMOS SETUP.
The parameters are displayed as follows:

Write to CMOS and Exit

The selected options and new password (if any) are stored in CMOS RAM. A checksum is
calculated and written to CMOS RAM. Control is passed to AMIBIOS.
Write to CMOS and Exit (Y/N)?
appears when you press <Enter> when this option is highlighted. Type N and press <Enter> to
return to the Main Menu. Type Y and press <Enter> to save the system parameters and continue
the boot process.

Do Not Write to CMOS RAM and Exit

This option passes control to AMIBIOS. After this option is highlighted and you press <Enter>,
type N and press <Enter> to return to the Main Menu. Type Y and press <Enter> to continue to
boot without saving.
Chapter 5 AMIBIOS Setup
90