Chapter 3 Installation; Step 1 Unpack The Motherboard - American Megatrends Enterprise-III User Manual

Chapter 3
Installation

Step 1 Unpack the Motherboard

Enterprise-III EISA VLB Motherboard User's Guide
Step
1 Unpack the motherboard
2 Set switch and jumper options.
3 Install memory.
4 Install upgradeable processor or math
coprocessor.
5 Install motherboard.
6 Connect the power supply.
7 Connect the keyboard.
8 Connect the mouse.
9 Connect cables.
10 Install adapter cards
11 Perform initial test and configuration.
Step
1 If the box is damaged, call Technical Support at 404-246-8600.
2 Perform all unpacking and installation procedures on a grounded
anti-static mat. Wear an anti-static wristband, grounded at the
same point as the anti-static mat or use a sheet of conductive
aluminum foil grounded through a 1 megohm resistor.
3 The motherboard is packed in an anti-static bag, and sandwiched
between sheets of sponge. Remove the sponge and the anti-static
bag. Save the original packing material.
4 Place the motherboard on a grounded anti-static surface
component-side up.
5 Inspect the motherboard for damage. Do not apply power if
damaged.
6 Press down on all socketed ICs to verify proper seating.
7 If the motherboard is undamaged, it is ready to be installed.
Action
Action
Turn to
Page 43
Page 45
Page 49
Page 53
Page 56
Page 58
Page 62
Page 62
Page 64
Page 68
Page 77
43