American Megatrends Baby Voyager User Manual page 9

Specifications, Continued
R O M R O M
The AMI Baby Voyager has 64 KB of Read Only Memory (ROM) used
for the system BIOS at address F0000h.
S h a d o w R A M S h a d o w R A M
The AMI Baby Voyager system BIOS is always shadowed from ROM
to RAM. The end user can select video BIOS shadowing through AMI
BIOS Setup.
O n b o a r d I / O O n b o a r d I / O
The AMI Baby Voyager has an IDE controller, floppy controller, two
serial ports, and one parallel port on the motherboard.
S y s t e m B I O S S y s t e m B I O S
The AMI Baby Voyager uses an AMI Hi-Flex BIOS with built-in Setup
configuration utility and hard disk drive utilities.
Through the AMI BIOS Setup, an end user can configure up to two
user-definable hard disk drive types. The end user can easily configure
systems with no video monitor, keyboard, or floppy disk drive through
AMI BIOS Setup.
C M O S R A M C M O S R A M
The AMI Baby Voyager has 128 bytes of CMOS RAM, used to store
system configuration. CMOS RAM requires an external source (a 4.5
to 6 volt battery) for battery back-up.
AMI Baby Voyager User's Guide
3